Devices with display will also have the following message on the screen: The error mode is indicated by blinking red status LED. When you first run the application the device will enter the error mode, which means that it's setting (which are stored in the EEPROM) require initialization.Subsequent upgrades of this application can be done via the DS Manager (part of the TDST). Load the application using Device Explorer.Install the latest version even if you already had TDST installed on your PC. Download and install the Tibbo Device Server Toolkit (TDST) software for Windows.Just in case yours had it differently or was already used to run something else, here is what you do to prep the app: There are many other device server usage scenarios which we will not talk about here.ĭS1101 devices ship with this SoI application preloaded and properly initialized. We also briefly explain new stuff, like the OLED display or the interface switchover.Īs an example, we will setup one serial port of the DS1101 device to operate with a virtual serial port (VSP, a.k.a. Material on this page is meant as a simple introduction on how to use this SoI Tibbo BASIC application. We have a separate Serial-over-IP Solutions Manual that explains everything in detail. Like our fixed firmware devices, the SOI application works with our Tibbo Device Server Toolkit (TDST). No support for start and end characters on the serial side.Multi-port and multi-channel operation.Web admin interface - setup your devices via the web browser.Wi-Fi and GPRS support with seamless switching between Ethernet, WiFi, and GPRS.Support for the OLED display of DS1101 and DS1102 devices.The application closely resembles our fixed SOI firmware. It runs on our BASIC-programmable devices, such as the new DS110x family of programmable serial controllers.

This project is a serial-over-IP (SOI) application written in Tibbo BASIC. Many Tibbo customers first came to know us by our fixed-function device servers (such as the DS203) and modules ( EM203).

Ip over serial